YOUNG TECH PACK
열처리 적용강종
| 몰드금형 |
1.2083, HPM38, STAVAX, POLMAX, M333 Aging용 : SUS630, HTCS-233, YAG250(300) |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 열간금형 |
1.2343, 1.2344, 1.2367, DAC, DAC-55, DAC-Magic SKD61, FASTCOOL-50, DTX-2, DuRA61, H13 8407 SUPREME (DIVAR/HOTVAR) |
||||||||||
| 냉간금형 |
SLD, SLD-Magic, SLD-10, DC11, DC-53 ASSAB-88, HWS, K-340, SKD11 CPM-9V, CPM-10V, CPM-15V, D2 |
||||||||||
| 고속도공구강 |
Mo계 - SKH51(M2), SKH55, SKH59 V계 - SKH10, SKH57, SKH54(M4) W계 - SKH2, SKH3, SKH4 |
||||||||||
| 분말고속도공구강 |
ASP23, ASP30, ASP60 SPM23, SPM30, SPM60 PMD23, PMD30, PMD60 VANADIS 23, VANADIS 30, VANADIS 60 HAP40, HAP50, HAP72 |
||||||||||
| Titanium |
Grade 2 - Annealing Grade 5 - Solution + Aging |
||||||||||
| Ni Based Alloy |
|
||||||||||
| Stainless |
|
||||||||||
| Cu |
몰드막스 / AMPCO 83 / C1720 - Aging C1100(순동) , C1720(Be-Cu) , CuCrZr(지르코늄동) , CuZn10(아연동) |
||||||||||
| 질화용강 |
NAK55, NAK80, KP1, KP4, KP4M, CENA-1, DH2F SACM645, 34CrAlNi7(1.8550) |
||||||||||
몰드금형강의 특성비교
| PROPERTY | Impax Supreme | Nimax | Mirrax 40 | Corrax | Vidar 1 ESR | Orvar Supreme | Stavax ESR | Mirrax ESR | Polmax | Unimax | Rigor | Elmax | Vanadis 4 Extra | Ramax HH | RoyAlloy | Holdax |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nomal hardness HRC(HB) | (310) | (380) | (380) | 46 | 48 | 52 | 52 | 52 | 52 | 58 | 59 | 58 | 62 | (~340) | (~310) | (~310) |
| Wear resistance | 3 | 4 | 4 | 5 | 6 | 7 | 7 | 7 | 7 | 8 | 8 | 9 | 10 | 4 | 3 | 3 |
| Toughness | 9 | 10 | 6 | 7 | 8 | 6 | 5 | 6 | 5 | 6 | 3 | 4 | 5 | 3 | 4 | 4 |
| Compressive strength | 4 | 5 | 5 | 6 | 6 | 7 | 7 | 7 | 7 | 8 | 9 | 9 | 9 | 5 | 4 | 4 |
| Corrosion resistance | 2 | 2 | 7 | 10 | 3 | 3 | 8 | 9 | 8 | 3 | 2 | 6 | 2 | 7 | 7 | 2 |
| Machinability | 5 | 5 | 6 | 4 | 9 | 9 | 8 | 7 | 8 | 7 | 5 | 3 | 4 | 6 | 7 | 7 |
| Polishability | 7 | 7 | 8 | 7 | 8 | 8 | 9 | 9 | 10 | 8 | 5 | 8 | 8 | 4 | 4 | 4 |
| Weldability | 6 | 7 | 5 | 6 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 5 | 6 | 6 |
| Nitriding ability | 6 | 5 | - | - | 10 | 10 | - | - | - | 8 | 6 | - | 8 | - | - | 5 |
| Etchability | 8 | 8 | 8* | 8* | 9 | 9 | 8* | 8* | 8* | 9 | 5 | 8* | 8 | 3 | 3 | 3 |